THORLABS DCU223 SERIES Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
157
4.3.13 is_CopyImageMem
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_CopyImageMem (HIDS hCam, char* pcSource, INT nID, char* pcDest)
Description
is_CopyImageMem() copies the contents of the image memory described by pcSource and nID to
the memory area to whose starting address pcDest points.
Attention
The allocated memory must be large enough to accommodate the entire image in its current
format (bits per pixel).
Input parameters
hCam
Camera handle
pcSource
Pointer to the image memory
nID
ID of this image memory
pcDest
Pointer to the destination memory to copy the
image to
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
IS_NO_SUCCESS
General error message
IS_SUCCESS
Function executed successfully
Related functions
is_AllocImageMem()
is_SetAllocatedImageMem()

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English