THORLABS DCU223 SERIES Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging418
DCx Camera Functional Description and SDK Manual
Description
israw_GetFrame() returns the image data from an image sequence.
Input parameters
unFileID
Instance ID set by the israw_InitFile() function
pData
Pointer to the image data
punTimestampDevice
Data timestamp
Return values
IS_AVI_NO_ERR
No error, function executed successfully.
IS_AVI_ERR_EXCEPTION
An error has occurred.
IS_AVI_ERR_FILE_NOT_OPEN
The file is not open.
IS_AVI_ERR_GENERIC
Generic error
IS_AVI_ERR_INVALID_ID
The indicated instance could not be found.
Either the ID is invalid or the instance has
already been deleted using israw_ExitFile().
IS_AVI_ERR_NOT_SUPPORTED
The file was opened in "read-only" mode (see
israw_InitFile()).
IS_AVI_ERR_READ_FAILED
The file could not be read.
Related functions
israw_SeekFrame()
4.5.5 israw_GetImageInfo
USB 2.0
USB 3.0
GigE
-
Syntax
INT israw_GetImageInfo(UINT unFileID, UINT* punWidth, UINT* punHeight, UINT* punBitsPerPixel)
Description
israw_GetImageInfo() returns the width, height, and bit depth of the data which are saved in the
RAW file.
Input parameters
unFileID
Instance ID set by the israw_InitFile() function
punWidth
Image width
punHeight
Image height
punBitsPerPixel
Bit depth (bits per pixel)
Return values
IS_AVI_NO_ERR
No error, function executed successfully.
IS_AVI_ERR_EXCEPTION
An error has occurred.

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English