THORLABS DCU223 SERIES Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
393
4.3.107 is_WriteEEPROM
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_WriteEEPROM (HIDS hCam, INT Adr, char* pcString, INT Count)
Description
Using is_WriteEEPROM(), you can write data to the EEPROM of the camera. Besides the hard-
coded factory information, the EEPROM of the DCx Camera can hold 64 bytes of user data.
Input parameters
hCam
Camera handle
Adr
Starting address for data writes (0...63)
pcString
Pointer to the string containing the data to be written
Count
Number of characters to be written (1...64)
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not
match the current camera model.
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MODE
Camera is in standby mode, function not allowed
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
IS_NO_SUCCESS
General error message
IS_NOT_CALIBRATED
The camera does not contain any calibration
data.
IS_NOT_SUPPORTED
The camera model used here does not support
this function or setting.
IS_NULL_POINTER
Invalid array
IS_SUCCESS
Function executed successfully
IS_TIMED_OUT
A timeout occurred. An image capturing process
could not be terminated within the allowable
period.

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English