THORLABS DCU223 SERIES Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging378
DCx Camera Functional Description and SDK Manual
4.3.98 is_SetTimeout
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_SetTimeout (HIDS hCam, UINT nMode, UINT Timeout)
Description
Using is_SetTimeout(), you can change user-defined timeout values of the uc480 API. If no user-
defined timeout is set, the default value of the uc480 API is used for the relevant timeout.
For further information, please refer to the How to proceed: Timeout values for image capture
section.
Note
The user-defined timeout only applies to the specified camera at runtime of the program.
Input parameters
hCam
Camera handle
nMode
Selects the timeout value to be set
IS_TRIGGER_TIMEOUT
Sets the timeout value for triggered image capture
Timeout
Timeout value in 10 ms.
Value range [0; 4...429496729] (corresponds to 40 ms to
approx. 1193 hours)
0 = use default value of the uc480 API
For 1...3, the value 4 is used.
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver
has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed. Possibly the
versions of the uc480.dll (API) and the driver file
(uc480_usb.sys) do not match.
IS_NO_SUCCESS
General error message
IS_NOT_SUPPORTED
The camera model used here does not support this
function or setting.
IS_SUCCESS
Function executed successfully
Related functions
is_GetTimeout()
is_CaptureVideo()
is_FreezeVideo()
is_SetExternalTrigger()

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English