THORLABS DCU223 SERIES Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging256
DCx Camera Functional Description and SDK Manual
4.3.54 is_GetTimeout
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_GetTimeout (HIDS hCam, UINT nMode, UINT* pTimeout)
Description
Using is_GetTimeout(), you can read out user-defined timeout values from the uc480 API.
For further information, please refer to the How to proceed: Timeout values for image capture
section.
Input parameters
hCam
Camera handle
nMode
Selects the timeout value to be returned
IS_TRIGGER_TIMEOUT
Returns the timeout value in steps of 10 ms for triggered
image capture
pTimeout
Pointer to the variable that holds the timeout value. Returns
0 if the default value of the uc480 API is used.
Return values
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_PARAMETER
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not available
in this mode.
IS_NO_SUCCESS
General error message
IS_NOT_SUPPORTED
The camera model used here does not support this
function or setting.
IS_SUCCESS
Function executed successfully
Related functions
is_SetTimeout()
is_CaptureVideo()
is_FreezeVideo()
is_SetExternalTrigger()
Example
// Return user-defined timeout
UINT nTimeout;
INT ret = is_GetTimeout(hCam, IS_TRIGGER_TIMEOUT, &nTimeout);

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English