THORLABS DCU223 SERIES Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
151
E
battery operation
INT
IS_CONFIG_OPEN_MP_DISABLE
OpenMP support disabled
INT
IS_CONFIG_OPEN_MP_ENABLE
OpenMP support enabled
INT
IS_CONFIG_INITIAL_PARAMETERSET_NONE
Load camera parameters during
initialization disabled
INT
IS_CONFIG_INITIAL_PARAMETERSET_1
Load camera parameter set 1 during
initialization
INT
IS_CONFIG_INITIAL_PARAMETERSET_2
Load camera parameter set 2 during
initialization
Return values
IS_CANT_OPEN_REGISTRY
Error opening a Windows registry key
IS_CANT_READ_REGISTRY
Error reading settings from the Windows registry
IS_ERROR_CPU_IDLE_STATES_CONFIGURATION
The configuration of the CPU idle has failed.
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_NO_IMAGE_MEM_ALLOCATED
The driver could not allocate memory.
IS_NO_SUCCESS
General error message
IS_NOT_SUPPORTED
The camera model used here does not support
this function or setting.
IS_OPERATING_SYSTEM_NOT_SUPPORTED
Operating system not supported
IS_SUCCESS
Function executed successfully
Related functions
is_ParameterSet()

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English