THORLABS DCU223 SERIES Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
325
hCam
Camera handle
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_SENSOR_GAIN
Returns the current auto gain setting of the
sensor
*1
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_SHUTTER
Enables/disables the auto exposure shutter
function.
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_SHUTTER
Returns the current auto exposure shutter setting.
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_SENSOR_SHUTTER
Enables/disables the sensor's internal auto
exposure shutter function
*1
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_SENSOR_SHUTTER
Returns the sensor's current auto exposure
shutter setting
*1
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_WHITEBALANCE
Enables/disables the auto white balance
function.
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_WHITEBALANCE
Returns the current auto white balance setting.
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_SENSOR_WHITEBALANCE
Enables/disables the sensor's internal auto white
balance function
*1
Control parameters
pval1: white balance mode (see
is_GetAutoInfo()):
WB_MODE_DISABLE
WB_MODE_AUTO
WB_MODE_ALL_PULLIN
WB_MODE_INCANDESCENT_LAMP
WB_MODE_FLUORESCENT_DL
WB_MODE_OUTDOOR_CLEAR_SKY
WB_MODE_OUTDOOR_CLOUDY
IS_GET_ENABLE_AUTO_SENSOR_WHITEBALANCE
Returns the sensor's current auto white balance
setting
*1
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_FRAMERATE
Enables/disables the auto frame rate function.

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English