EasyManuals Logo

THORLABS DCU223 SERIES Description And Sdk Manual

THORLABS DCU223 SERIES
513 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #335 background imageLoading...
Page #335 background image
© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
333
hCam
Camera handle
IS_BINNING_2X_HORIZONTAL
Enables horizontal binning with factor 2.
IS_BINNING_3X_HORIZONTAL
Enables horizontal binning with factor 3.
IS_BINNING_4X_HORIZONTAL
Enables horizontal binning with factor 4.
IS_BINNING_5X_HORIZONTAL
Enables horizontal binning with factor 5.
IS_BINNING_6X_HORIZONTAL
Enables horizontal binning with factor 6.
IS_BINNING_8X_HORIZONTAL
Enables horizontal binning with factor 8.
IS_BINNING_16X_HORIZONTAL
Enables horizontal binning with factor 16.
IS_GET_BINNING
Returns the current setting.
IS_GET_BINNING_FACTOR_VERTICAL
Returns the vertical binning factor.
IS_GET_BINNING_FACTOR_HORIZONTAL
Returns the horizontal binning factor.
IS_GET_SUPPORTED_BINNING
Returns the supported binning modes.
IS_GET_BINNING_TYPE
Indicates whether the camera uses color-proof
binning (IS_BINNING_COLOR) or not
(IS_BINNING_MONO)
Return values
When used with
IS_GET_BINNING
Current setting
When used with
IS_GET_BINNING_FACTOR_VERTICAL
IS_GET_BINNING_FACTOR_HORIZONTAL
Current setting: Returns the current factor as
integer value (2, 3, 4, 5, 6, 8, 16)
When used with
IS_GET_BINNING_TYPE
Returns IS_BINNING_COLOR if the camera uses
color-proof binning; otherwise, IS_BINNING_MONO
is returned.
When used with
IS_GET_SUPPORTED_BINNING
Returns the supported binning modes linked by
logical ORs.
IS_BAD_STRUCTURE_SIZE
An internal structure has an incorrect size.
IS_CANT_ADD_TO_SEQUENCE
The image memory is already included in the
sequence and cannot be added again.
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
IS_CAPTURE_RUNNING
A capturing operation is in progress and must
be terminated before you can start another one.
IS_DR_CANNOT_CREATE_SURFACE
The image surface or overlay surface could not
be created.
IS_DR_CANNOT_CREATE_TEXTURE
The texture could not be created.
IS_DR_CANNOT_CREATE_VERTEX_BUFFER
The vertex buffer could not be created.
IS_DR_DEVICE_OUT_OF_MEMORY
Not enough graphics memory available.
IS_DR_LIBRARY_NOT_FOUND
The DirectRenderer library could not be found.
IS_INVALID_BUFFER_SIZE
The image memory has an inappropriate size to

Table of Contents

Other manuals for THORLABS DCU223 SERIES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the THORLABS DCU223 SERIES and is the answer not in the manual?

THORLABS DCU223 SERIES Specifications

General IconGeneral
BrandTHORLABS
ModelDCU223 SERIES
CategorySecurity Camera
LanguageEnglish

Related product manuals