© 2016 Thorlabs Scientific Imaging376
DCx Camera Functional Description and SDK Manual
The image memory has an
inappropriate size to store the image in
the desired format.
The camera type defined in the .ini file
does not match the current camera
model.
The function can not be executed in the
current camera operating mode (free
run, trigger or standby).
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
Camera is in standby mode, function not
allowed
One of the submitted parameters is
outside the valid range or is not
supported for this sensor or is not
available in this mode.
This setting is not available for the
currently set pixel clock frequency.
An IO request from the uc480 driver
failed. Possibly the versions of the
uc480.dll (API) and the driver file
(uc480_usb.sys) do not match.
No active image memory available. You
must set the memory to active using the
is_SetImageMem() function or create a
sequence using the
is_AddToSequence() function.
The camera does not contain any
calibration data.
The camera model used here does not
support this function or setting.
No memory could be allocated.
IS_SEQUENCE_BUF_ALREADY_LOCKED
The memory could not be locked. The
pointer to the buffer is invalid.
Function executed successfully
A timeout occurred. An image capturing
process could not be terminated within
the allowable period.
The function cannot be used because
the camera is waiting for a trigger
signal.
Related functions
is_SetBinning()