© 2016 Thorlabs Scientific Imaging386
DCx Camera Functional Description and SDK Manual
is regarded as a disturbance and ignored.
The nCommand input parameter is used to select the function mode. The pParam input parameter
depends on the selected function mode. If you select functions for setting or returning a value,
pParam contains a pointer to a variable of the UINT type. The size of the memory area to which
pParam refers is specified in the nSizeOfParam input parameter.
is_TriggerDebounce() delays the start of a triggered image capture by the selected
time (DELAY_TIME).
This function is currently only supported by the GigE uEye camera series.
Input parameters