THORLABS DCU223 SERIES User Manual

© 2013 Thorlabs GmbH
3 Operation
121
Stop Loop mode (red text)
Start of playback loop
End of playback loop
Save current frame as BMP file or JPEG file
Print current frame
Sound on/off
Open video file
Close video file
1
Position markers for the defined playback loop
2
Current position in video file
3
Size of the video display window in pixels
4
Current frame number
5
Number of frames in video file
6
Volume control
7
Frame display parameter settings. Each slider can be reset to its default setting by clicking it with
the right mouse button. The settings are also applied to the subsequent files.
8
Current playback speed setting
9
Playback speed in relation to the recording speed from 0.1 to 200 fps. The values are set in
increments.
Using the button, you can jump directly to a specific frame. To do so, enter a numerical value between 1 and
the total number of frames in the video sequence.
122
122
122

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English