© 2013 Thorlabs GmbH358
DCx Cameras
4.3.103 is_WriteEEPROM
Syntax
INT is_WriteEEPROM (HIDS hCam, INT Adr, char* pcString, INT Count)
Description
Using is_WriteEEPROM(), you can write data to the EEPROM of the camera. Besides the hard-coded factory
information, the EEPROM of the DCx Camera can hold 64 bytes of user data.
Input parameters
Starting address for data writes (0...63)
Pointer to the string containing the data to be written
Number of characters to be written (1...64)
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
The camera type defined in the .ini file does not match
the current camera model.
Camera is in standby mode, function not allowed
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
The camera does not contain any calibration data.
The camera model used here does not support this
function or setting.
Function executed successfully
A timeout occurred. An image capturing process could
not be terminated within the allowable period.
Related functions
is_ReadEEPROM()
296
To Next Page
Loading...
Need help?
General
