© 2013 Thorlabs GmbH152
DCx Cameras
4.2.6 Using Inputs and Outputs
Depending on the model, DCx Cameras have one or more digital inputs and outputs designed for different
purposes.
Input/output control : Here, you will find functions for setting the DCxCamera's I/Os and for using the trigger
and flash modes.
4.2.6.1 Input/Output Control
With these functions you can use the camera's digital in-/outputs for trigger and flash control.
Enables the digital input for trigger operation or returns the applied
signal level.
Sets the digital output for flash control or a static output level.
Sets the delay and power-on time of the flash output.
Sets the trigger signal delay time.
Determines the delay and power-on times of the flash output to
obtain a global shutter effect when using rolling shutter sensors.
Simulates a trigger signal in hardware trigger mode.
With these commands you can activate additional functions or use GPIOs on some DCx Cameras.
Sets the additional digital outputs (GPIO).
Defines each port as a digital input or output (GPIO).
Toggles the color of the status LED for DCU22x and DCC1240x
cameras.
152
327
280
280
352
280
221
280
280
280