THORLABS DCU223 SERIES User Manual

© 2013 Thorlabs GmbH326
DCx Cameras
4.3.82 is_SetErrorReport
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_SetErrorReport (HIDS hCam, INT Mode)
Description
Using is_SetErrorReport(), you can enable/disable error event logging. If error reporting is enabled, errors
will automatically be displayed in a dialog box. Cancelling the dialog box disables the error report. Even with
disabled error reporting, you can still query errors using the is_GetError() function.
Note
is_SetErrorReport() can be called before calling is_InitCamera() .
You only need to enable the is_SetErrorReport() function once for all cameras in the application.
Input parameters
hCam
Camera handle
Or 0 if no camera has been initialized yet
Mode
IS_DISABLE_ERR_REP
Disables error reporting.
IS_ENABLE_ERR_REP
Enables error reporting.
IS_GET_ERR_REP_MODE
Current status of error reporting.
Return values
When used with
IS_GET_ERR_REP_MODE
Current setting
IS_SUCCESS
Function executed successfully
Related functions
is_GetError()
is_CaptureStatus()
is_CameraStatus()
239
273
239
174
172

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English