THORLABS DCU223 SERIES User Manual

© 2013 Thorlabs GmbH
4 Programming (SDK)
193
hCam
Camera handle
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE_MANUA
L_GAIN_DEFAULT
Returns the default settings for the manual gain for the
Log mode (Example 6 )
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE_MANUA
L_GAIN_RANGE
Returns the range for the manual gain of the Log mode
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE_MANUA
L_GAIN
Returns the current manual gain of the Log mode
(Example 7 )
IS_DEVICE_FEATURE_CMD_SET_LOG_MODE_MANUA
L_GAIN
Sets the manual gain of the Log mode
pParam
Pointer to a function parameter, whose function
depends on nCommand.
nSizeOfParam
Size (in bytes) of the memory area to which
pParam refers.
Status Flags from DEVICE_FEATURE_MODE_CAPS
IS_DEVICE_FEATURE_CAP_SHUTTER_MODE_ROLLIN
G
Rolling shutter mode is supported/Set mode
IS_DEVICE_FEATURE_CAP_SHUTTER_MODE_ROLLIN
G_GLOBAL_START
Rolling shutter mode with global start is supported/Set
mode
IS_DEVICE_FEATURE_CAP_SHUTTER_MODE_GLOBAL
Global shutter mode is supported/Set mode
IS_DEVICE_FEATURE_CAP_SHUTTER_MODE_GLOBAL
_ALTERNATIVE_TIMING
Global shutter mode with different timing parameters is
supported/Set mode
IS_DEVICE_FEATURE_CAP_LINESCAN_MODE_FAST
Fast line scan mode is supported/Set mode
IS_DEVICE_FEATURE_CAP_LINESCAN_NUMBER
Line number at fast line scan mode is supported/Set
number
IS_DEVICE_FEATURE_CAP_LOG_MODE
LinLog pixel mode is supported/Set mode
LOG_MODES
IS_LOG_MODE_FACTORY_DEFAULT
Default settings for the Log mode
IS_LOG_MODE_OFF
Log mode off
IS_LOG_MODE_MANUAL
Manual Log mode. In this case the LogMode value and
the LogMode gain are effective.
195
195

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English