© 2013 Thorlabs GmbH320
DCx Cameras
Planar RGB (8) for monochrome and color cameras, LUT/gamma active
BGR16 (5 6 5), for monochrome and color cameras, LUT/gamma active
BGR15 (5 5 5), for monochrome and color cameras, LUT/gamma active
YUV 4:2:2 (8 8), for monochrome and color cameras, LUT/gamma active
YC
b
C
r
4:2:2 (8 8), for monochrome and color cameras, LUT/gamma active
Returns the current setting.
Return values
When used together with
IS_GET_COLOR_MODE
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
A capturing operation is in progress and must be
terminated before you can start another one.
The camera type defined in the .ini file does not match
the current camera model.
Camera is in standby mode, function not allowed
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
The camera does not contain any calibration data.
The camera model used here does not support this
function or setting.
No memory could be allocated.
Function executed successfully
A timeout occurred. An image capturing process could
not be terminated within the allowable period.
Related functions
is_SetDisplayMode()
is_SetColorConverter()
is_SetColorCorrection()
is_GetColorDepth()
is_AllocImageMem()
is_RenderBitmap()
322
315
317
237
157
297
To Next Page
Loading...
Need help?
General
