THORLABS DCU223 SERIES User Manual

© 2013 Thorlabs GmbH348
DCx Cameras
hCam
Camera handle
IS_GET_SUBSAMPLING_FACTOR_HORIZONTAL
Returns the horizontal sub-sampling factor
IS_GET_SUBSAMPLING_TYPE
Indicates whether the camera uses color-proof sub-
sampling.
IS_GET_SUPPORTED_SUBSAMPLING
Returns the supported sub-sampling modes.
Return values
When used with
IS_GET_SUBSAMPLING
Current setting: Returns an ORing of the
defined constants from ueye.h, e.g.
IS_SUBSAMPLING_2X_HORIZONTAL
When used with
IS_GET_SUBSAMPLING_FACTOR_VERTICAL
IS_GET_SUBSAMPLING_FACTOR_HORIZONTAL
Current setting: Returns the current factor as
integer value (2, 3, 4, 5, 6, 8, 16)
When used with
IS_GET_SUBSAMPLING_TYPE
Current setting: Returns
IS_SUBSAMPLING_COLOR if the camera uses
color-proof sub-sampling, else
IS_SUBSAMPLING_MONO
In Verbindung mit
IS_GET_SUPPORTED_SUBSAMPLING
Returns the supported sub-sampling modes
linked by logical ORs
IS_BAD_STRUCTURE_SIZE
An internal structure has an incorrect size.
IS_CANT_ADD_TO_SEQUENCE
The image memory is already included in the
sequence and cannot be added again.
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
IS_CAPTURE_RUNNING
A capturing operation is in progress and must
be terminated before you can start another one.
IS_DR_CANNOT_CREATE_SURFACE
The image surface or overlay surface could not
be created.
IS_DR_CANNOT_CREATE_TEXTURE
The texture could not be created.
IS_DR_CANNOT_CREATE_VERTEX_BUFFER
The vertex buffer could not be created.
IS_DR_DEVICE_OUT_OF_MEMORY
Not enough graphics memory available.
IS_DR_LIBRARY_NOT_FOUND
The DirectRenderer library could not be found.
IS_INVALID_BUFFER_SIZE
The image memory has an inappropriate size to
store the image in the desired format.
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not
match the current camera model.
IS_INVALID_CAPTURE_MODE
The function can not be executed in the current
camera operating mode (free run, trigger or
standby).
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
IS_INVALID_MODE
Camera is in standby mode, function not
allowed
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_INVALID_PIXEL_CLOCK
This setting is not available for the currently set
pixel clock frequency.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed.
Possibly the versions of the uc480_api.dll

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English