© 2013 Thorlabs GmbH422
DCx Cameras
Return values
When used together with
IS_GET_BL_SUPPORTED_MODE
When used together with
IS_GET_BL_COMPENSATION
When used together with
IS_GET_BL_OFFSET
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
The camera type defined in the .ini file does not match
the current camera model.
Camera is in standby mode, function not allowed
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
The camera does not contain any calibration data.
The camera model used here does not support this
function or setting.
Function executed successfully
A timeout occurred. An image capturing process could
not be terminated within the allowable period.
To Next Page
Loading...
Need help?
General
