THORLABS DCU223 SERIES User Manual

© 2013 Thorlabs GmbH456
DCx Cameras
No
Error
Description
176
IS_INVALID_I2C_DEVICE_ADDRESS
Invalid I
2
C device address
177
IS_COULD_NOT_CONVERT
The current image could not be processed.
178
IS_TRANSFER_ERROR
Transfer error. Frequent transfer errors can mostly
be avoided by reducing the pixel rate.
179
IS_PARAMETER_SET_NOT_PRESENT
Parameter set is not present.
180
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not
match the current camera model.
181
IS_INVALID_HOST_IP_HIBYTE
Invalid HIBYTE of host address
182
IS_CM_NOT_SUPP_IN_CURR_DISPLAYMODE
The color mode is not supported in the current
display mode.
183
IS_NO_IR_FILTER
No IR filter available
184
IS_STARTER_FW_UPLOAD_NEEDED
The camera's starter firmware is not compatible
with the driver and needs to be updated.
185
IS_DR_LIBRARY_NOT_FOUND
The DirectRenderer library could not be found.
186
IS_DR_DEVICE_OUT_OF_MEMORY
Not enough graphics memory available.
187
IS_DR_CANNOT_CREATE_SURFACE
The image surface or overlay surface could not be
created.
188
IS_DR_CANNOT_CREATE_VERTEX_BUFFER
The vertex buffer could not be created.
189
IS_DR_CANNOT_CREATE_TEXTURE
The texture could not be created.
190
IS_DR_CANNOT_LOCK_OVERLAY_SURFACE
The overlay surface could not be locked.
191
IS_DR_CANNOT_UNLOCK_OVERLAY_SURFACE
The overlay surface could not be unlocked.
192
IS_DR_CANNOT_GET_OVERLAY_DC
Could not get the device context handle for the
overlay.
193
IS_DR_CANNOT_RELEASE_OVERLAY_DC
Could not release the device context handle for the
overlay.
194
IS_DR_DEVICE_CAPS_INSUFFICIENT
Function is not supported by the graphics hardware.
195
IS_INCOMPATIBLE_SETTING
Because of other incompatible settings the function
is not possible.
196
IS_DR_NOT_ALLOWED_WHILE_DC_IS_ACTIVE
A device context handle is still open in the
application.
197
IS_DEVICE_ALREADY_PAIRED
The device is already paired.
198
IS_SUBNETMASK_MISMATCH
The subnet mask of the camera and PC network
card are different.
199
IS_SUBNET_MISMATCH
The subnet of the camera and PC network card are
different.
200
IS_INVALID_IP_CONFIGURATION
The configuration of the IP address is invalid.
201
IS_DEVICE_NOT_COMPATIBLE
The device is not compatible to the drivers.
202
IS_NETWORK_FRAME_SIZE_INCOMPATIBLE
The settings for the image size of the camera are
not compatible to the PC network card.
203
IS_NETWORK_CONFIGURATION_INVALID
The configuration of the network card is invalid.
204
IS_ERROR_CPU_IDLE_STATES_CONFIGURATION
The configuration of the CPU idle has failed.
205
IS_DEVICE_BUSY
The camera is busy ad cannot transfer the
requested image.

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English