© 2013 Thorlabs GmbH
6 Appendix
511
New function for saving and loading image files.
Information in this manual
Now, for all functions all return values are listed in the function
description.
With the is_ Convert() function the following uc480 functions
are now obsolete:
is_ConvertImage()
is_SetConvertParam()
With the is_EdgeEnhancement() function, the following uc480
function is now obsolete:
is_SetEdgeEnhancement()
With the is_ParameterSet() function the following uc480
functions are now obsolete:
is_SaveParameters()
is_LoadParameters()
With the is_PixelClock() function the following uc480 functions
are now obsolete:
is_GetPixelClockRange()
is_SetPixelClock()
With the is_DeviceInfo() function, the following uc480 function
is now obsolete:
is_GetEthDeviceInfo()
With the is_ImageFile() function the following uc480 functions
are now obsolete:
is_LoadImage()
is_LoadImageMem()
is_SaveImage()
is_SaveImageEx()
is_SaveImageMem()
is_SaveImageMemEx()
New in Version 3.90
Sequence AOI mode (camera models DCC1240x)
You can define up to 4 AOIs. These have the same size, but may
have a different position. It is also possible to have different settings
for each AOI for exposure time and master gain. In addition, you
can define for AOI 2, 3, and 4 how often they are readout and the
images are transferred.
Additional resolution profiles for CMOS and CCD cameras.
New demo uc480SequenceAoi for showing the sequence AOI
mode of the camera models DCC1240x.
New demo C#-Cockpit with expanded settings under C#.
New function for getting and setting of the camera exposure time.
New function for information about errors when capturing images.
New function for controlling the digital in-/outputs of the cameras
New header file uc480_deprecated.h with all deprecated
function definitions and constants. These are no longer part of the
uc480.h file. If neccessary the uc480_deprecated.h can be
264
379
379
379
379
379
379
113
159
267
216
174
280
To Next Page
Loading...
Need help?
General
