© 2013 Thorlabs GmbH
6 Appendix
513
On UI-1008XS (uEye XS) model: Choose the HS mode for
triggered image capture
Predefined image formats can now be set for all CMOS cameras
New uc480 Hotpixel Editor for editing the hotpixel list stored in the
camera
The I2C outputs on some uEye models can now be programmed
directly in the uc480 Viewer.
uc480 Viewer: Miscellaneous
The uc480 Viewer can now display and save images with a bit
depth of more than 8 bit.
Information in this manual
The application notes for the individual camera models are now
provided in a separate chapter.
Application notes for the cameras
The is_AOI() function comprises all the functions for setting and
positioning an AOI. The following uc480 API commands are
therefore obsolete and have been moved to the Obsolete Functions
chapter:
is_SetAOI()
is_SetImageAOI()
is_SetImageSize()
is_SetImagePos()
is_AOI() also allows quickly moving an AOI to a different position.
Obsolete Functions
is_AOI()
New in Version 3.70
New API function for setting the color space and color
temperature
New function parameters for reading out the exposure time range
Information in this manual
Updated camera specifications
Schematic timing diagrams for using the flash in hardware trigger
mode
Digital In-/Output (Trigger/Flash)
New in Version 3.60
New function in uc480 Viewer for selection profiles for camera
settings
Start Dialog
Creating Profiles
Information in this manual
Function is_GetCameraType() moved to the "Obsolete
Functions" section. It is entirely replaced by is_GetCameraInfo
().
Obsolete Functions
is_GetCameraInfo()
267
123
110
99
63
379
159
180
427
461
47
76
117
379
231
To Next Page
Loading...
Need help?
General
