TNI softFlow 50 - 5 Hygienic Measures; Cleaning

34
Operating Instruction TNI soft Flow 50 homecare system
5) Hygienic Measures
WARNING
• Prior to each hygiene measures, switch o the main switch on the right side of the device and
disconnect the power connecting cable!
• Under no circumstances must uids get into the device!
• Non-observance of cleaning- and disinfection instructions may result in bacterial contamination
or infection!
• Overdosing disinfectors may damage the material.
• Please note the replacement cycles for applicator, “humidier clinic complete” parts and
“humidier homecare complete” parts! With the exceeding of this given time period, a proper
use of the device cannot be ensured.
• Avoid calcication of the respective parts! After a cleaning/disinfection, please check all parts
for damages to the surface and for proper functioning!
5.1) Cleaning
The Cleaning applies to the clinic status conferred upon or to information in accordance with RKI.
The following table concerning cleaning and changing cycles or individual producer information
serves as guideline.
When switching from one patient to the next, all components listed in the following table has to be
cleaned/replaced:
• Single use components have to be replaced.
• Accessory parts have to be cleaned.