TNI softFlow 50 - Table 9 - Recommended Separation Distances

53
Operating Instruction TNI soft Flow 50 homecare system
Recommended separation distances between
portable and mobile RF communications equipment and the “
TNI soft Flow 50
TheTNI soft
Flow 50isintendedforuseintheelectromagneticenvironmentinwhichradiated
RFdisturbancesarecontrolled.Thecustomerortheuserofthe“TNI soft Flow 50”canhelp
preventelectromagneticinterferencebymaintainingamiminumdistancebetweenportable
andmobileRFcommunicationsequipment(transmitters)andthe“TNI soft Flow 50”asrecom-
mendedbelow,accordingtothemaximumoutputpowerofthecommunicationequipment.
Rated maximum output
power of transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz

d=1.2√P
80 MHz to 800 MHz

d=1.17√P
800 MHz to 2.5
GHz
d=2.3√P
0.01 0.12 0.12 0.23
0.1 0.38 0.37 0.73
1 1.2 1.2 2.3
10 3.8 3.7 7.3
100 12 12 23
Fortransmittersratedatamaximumoutputpowernotlistedabove,therecommendedsepara-
tiondistancedinmetres(m)canbedeterminedusingtheequationapplicabletothefrequency
ofthetransmitter,wherePisthemaximumoutputpowerratingofthetransmitterinwatts(W)
accordingtothetransmittermanufacturer.
NOTE1At80MHzand800MHz,theseparationdistanceforthehigherfrequencyrange
applies.
NOTE2Theseguidelinesmaynotapplyinallsituations.Electromagneticpropagationisaf-
fectedbyabsorptionandreectionfromstructures,objectsandpeople.
Table 9 - Recommended separation distances between
portable and mobile RF communications equipment and the “
TNI soft Flow 50”