50
■ Setting of the Loop Abnormality PV Variation of Output 2
Character
Name
Description
Initial Value
1
SET3
CNT
Setting Mode Selection
Screen
Control Parameter Mode
Settings about Control
35
TS2
Setting of Output 2 Loop
Abnormality
PV Threshold
Setting Range: 0-999 or 0.0-999.9
Setting Unit: °C or °Ｆ
※ Setting "0" will turn the judgment on loop abnormality PV
threshold OFF
0
A function that detects the abnormality in the control loop.
If PV is within the range between SV setting value and tS2, the judgment on the loop disconnection takes place. Actual
judgment shall be made through PS2 and LoP2.
To Next Page
