■
3-4
[Connecting LAN cables]
■ For LAN connection, be sure to connect the unit to a computer via a hub.
The unit does not work correctly of directly connected to a computer.
Prepare the following items.
- LAN cables (straight type, category 5 or higher) : 2
- A network hub (A 100MHz switching hub recommended) : 1
- A computer with TOMEY Link or DATA Transfer installed : 1
g) AL-100 measurement data review screen
(1) Waveform display field
(2) Mode display field – Contact / Immersion
(3) Axial length measurement data field
(4) Measurement condition display field
(5) AL-100 version
(Wiring example)
Hub
This instrument
OA-2000
Personal
computer
LAN cable
LAN cable
Systems in clinic
(1)
(2)
(3)
(4)
(5)
To Next Page
Loading...
