3-122
● Color Tone Correction
Set the custom values for color tone correction on
the Slit Calculation screen.Numeric values can be
set for [Setting 1] and [Setting 2].Select the setting
to be used immediately after the analysis screen
opens in [Initial].Default, Setting 1, or Setting 2 can
be selected.Click the “Clear” button to clear the
preset custom value.Click the “Save” button to apply
changes or delete custom values.
● PVA (Ring)
Set format for the PVA value: decimals or fractions.
● Custom Print tab
Data set combinations for custom printing can be set
here.
Up to 4 types of combinations are available.
Drag and drop thumbnails of each screen from
Map Select Pallet (2) to any of the Custom1 through
Custom4 frames in the Settings area (1).Click
Merged or Ring tab in Map Select Pallet (2) to switch
thumbnails.
● IOL Screening tab
To Next Page
Loading...
