8
HOW TO USE THIS MANUAL
• Read the instructions on pages 1 to 10 before using the machine.
• Regarding connection to various devices, see "CONNECTING EXTERNAL I/O TERMINALS" on
page 21.
• If you would like an overview of the system, begin by reading "BASIC OPERATIONS"(page 24).
• For setting various functions, see "SETTING FUNCTIONS ON SETUP SCREEN" on page 48.
GENERAL MAINTENANCE INFORMATION
USER MAINTENANCE
To maintain the safety and performance of the equipment, never attempt to repair or perform maintenance.
These tasks should be performed by an authorized service representative.
Maintenance tasks that can be performed by the user are as follows; for details, follow the manual’s instruc-
tions.
CLEANING OF THE INTRAOCULAR PRESSURE MEASURING WINDOW
For details, See "CLEANING THE INTRAOCULAR PRESSURE MEASURING WINDOW" on page 56.
CLEANING THE MEASURING NOZZLE AND WINDOW GLASS INSIDE THE NOZZLE
Regarding the measuring nozzle and the glass surface inside the measuring nozzle, cleaning is allowed. For
details, see "CLEANING THE MEASURING NOZZLE AND THE GLASS INSIDE THE MEASURING NOZ-
ZLE" on page 57.
DISCLAIMERS
• TOPCON is not responsible for damage due to fire, earthquakes, actions or inactions of third persons or other
accidents, or damage due to negligence and misuse by the user and any use under unusual conditions.
• TOPCON is not responsible for damage derived from inability to properly use this equipment, such as loss of
business profits and suspension of business.
• TOPCON is not responsible for damage caused by operations other than those described in this User Manual.
• The device does not provide a diagnosis of any condition or lack thereof or any recommendations for appropri-
ate treatment. The relevant healthcare provider is fully responsible for all diagnosis and treatment decisions
and recommendations.
To Next Page
Loading...
