EasyManua.ls Logo

Topcon CT-800 - Default Chapter; Introduction

Topcon CT-800
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
INTRODUCTION
Thank you for purchasing the TOPCON Computerized Tonometer CT-800.
INTENDED USE / INDICATIONS FOR USE
Measured through the cornea based on the tension of the eye pressure within the eye ball, to
provide information for diagnosis.
FEATURES
This instrument features the following:
By spraying air, intraocular pressure can be correctly measured in non-contact.
Easy operation can be performed by using Z alignment mark.
PURPOSE OF THIS MANUAL
This User Manual provides an overview of the basic operation, troubleshooting, checking,
maintenance and cleaning of the TOPCON Computerized Tonometer CT-800.
To get the best use of the instrument, read Safety Displays and Safety Cautions.
Keep this Manual at hand for future reference.
Since this product is a precision instrument, always use and keep it in a normally controlled
living environment, within a temperature range of 10-40°C, humidity levels between 30-90%
and an atmospheric pressure range of 700hPa-1,060hPa.
The instrument should also be placed away from direct sunlight.
To ensure smooth operation, install the instrument on a level floor free of vibrations. Also, do
not place anything on the instrument.
Connect all cables properly before using.
Use the power at a rated voltage.
When not in use, switch off the power source and apply the nozzle cap and dust cover.
For accurate Photographing image, take care to keep the Photographing window clean and
free of fingerprints, spots and dust.
[CAUTION] Federal law restricts this device to sale by or on the order of a physician.

Table of Contents

Related product manuals