36
BASIC OPERATIONS
BASIC OPERATIONS
PRINTOUT OF MEASUREMENT VALUES
PRINTOUT OF MEASUREMENT VALUES
This instrument can print out measurement values with a printer.
1 Tap the button on the control panel.
Measurement values on the control panel are printed out.
• When measurement values are printed out, the values are cleared and the displayed values
disappear on the control panel.
2 If printing out of the measurement values is not required, be sure to clear the measurement
values for a next patient. (Refer to "CLEARING MEASUREMENT VALUES" on page 37.)
NOTE
• To avoid a paper jam in the printer, do not feed the paper if it is partly cut
or wrinkled.
• To avoid discoloring of the printer paper (particularly the recording area)
during storage, use a polypropylene bag and not one containing plasti-
cizer (PVC, etc.).
• To avoid discoloring of the printer paper (particularly the recording area)
after pasting, use water-soluble glue and not one containing solvent.
• Since the printer paper is thermosensitive, it is not suitable for keeping
records for a long period. If necessary, prepare copies separately.
NOTE
• When a red line is printed at the edge of the printer paper, replace it with a
new one. For details about the replacement of the printer paper, see
"PRINTER PAPER SETTING" on page 22. 58mm wide printer paper
(example: TP-50KJ-R, Nippon Paper) is recommended.
• "Close printer cover." indicates that the printer cover is left opened,
ensure that the printer cover is completely closed.
• If the print button is tapped again after printing of measurement value is
carried out and all measurement value is cleared, the last measurement
data is printed out.
0#/
'
6101#
ޛ4ޜ
OO*I#&,OO*I#&,
AA#/
1+&-GPL[CA
0Q-GPL[CA
50
%6
'44
#8)
#8)
#8)
'44
'44
'44
'44
'44
'44
'44
ޛ.ޜ
ޛ4ޜ
ޛ.ޜ
J2C#&,
J2C#&,
2#%1#
612%10
/GUUCIG
4 OO
. OO
To Next Page
Loading...
