41
BASIC OPERATIONS
BASIC OPERATIONS
OPERATION OF AFTER USE
OPERATION OF AFTER USE
1 Use the base stopper to fix the main body.
2 Turn the switch to off.
3 Unplug the power cable from a 3-pin AC inlet with grounding.
4 Fit the nozzle cap to the measuring nozzle.
NOTE
When external devices are connected to external I/O terminals, turn off the
power of these devices too.
(If power switch is provided.)
NOTE
When the instrument is not used for a long period, unplug the power supply
cable, and detach the cable connected to the external I/O terminal.
To Next Page
Loading...
