103
SPECIFICATIONS AND PERFORMANCE
Note 2: In this digital red-free photography, the color image is processed and is displayed as a pseudo
red-free photographed image.
Note 3: When the concave and convex diopter compensation lenses are used, it is not possible to use
the split auto focus function and the manual focus function with split lines.
Note 4: Observation & photography of anterior segment can be performed only when the anterior seg-
ment attachment kit is used.
• The design and the specifications are subject to change without prior notice for the product improve-
ment.
OTHER SPECIFICATIONS
* The design and the specifications are subject to change without prior notice for the product improve-
ment.
Laser product
Class for laser product Class 1 (Complies with IEC 60825-1: 2011.)
Laser aperture Objective lens
Output on cornea Pulse average light intensity: 1050µW or less
Laser light source
Type Wavelength-variable laser
Laser class Class 3B
Wavelength 1050nm
Base movement
Coarse movement Back-and-forth 59mm, Right-and-left 100mm
Fine movement 16mm in each of back-and-forth & right-and-left directions
Base up-and-down movement
30mm
Chinrest movement
67mm
NOTE
Essential performance
1) Fundus image can be observed.
2) OCT imaging can be observed and captured.
3) Observed image can be sent to PC.
To Next Page
Loading...
Need help?
General
