29
PREPARATIONS
PREPARATIONS
INSTALLING THE INSTRUMENT
1 Turn the base clamping knob clockwise as pushing it to lock the instrument body. (When unpack-
ing, the instrument body is locked.)
2 Firmly hold the instrument body at the specified positions, and put it on the automatic instrument
table.
3 After installing, turn the base clamping knob counterclockwise to unlock the instrument body.
CAUTION
• To prevent the instrument from falling and to avoid injury during carry-
ing, be sure to secure the instrument with the base clamping knob at
the bottom.
• To avoid injury or damage, two people should be employed for sup-
porting the instrument from the underside. Carrying by one person
may result in personal injury and/or damage to the instrument should
the person slip or fall. If you support any other part except the under-
side, you may be pinched by the instrument or injured by falling.
• To avoid falling and injury while moving the table with the instrument
on top of it, be sure to use an approved automatic instrument table.
• To prevent the instrument from falling and to avoid injury, install the
instrument on a level surface.
Holding positions
Base clamping knob
Holding the instrument body
To Next Page
Loading...
Need help?
General
