89
MAINTENANCE
MAINTENANCE
DAILY CHECKUPS
• Dust is a formidable foe to the instrument.
To ensure the production of fine images, care should be taken not to allow fingerprints and/or dirt to
get on the objective lens.
• Each time one patient is changed to another, replace the chinrest paper with new one.
• When not in use, be sure to cap the objective lens and cover the instrument with the dust cover.
• Before using the instrument, check if the objective lens is clean. If the objective lens is stained,
clean it following the instructions for "CLEANING THE OBJECTIVE LENS" on page 93.
• When not in use, always turn the OFF ( ).
ORDERING CONSUMABLES
• When ordering consumables and spare parts, contact your dealer or TOPCON (see the back cover)
and tell them the article name, article code and quantity.
Xenon Lamp
CAUTION
To prevent the instrument from falling and to avoid injury, install the
instrument on a level surface.
NOTE
Do not contact the attachment for anterior segment with rubber products during
storage. The material may deteriorate.
Article name Article code
Chinrest tissue 40310 4082
Dust cover 40496 9011
Article name Article code
Xenon lamp (for Model Model Triton) 40496 6250
Xenon lamp (for Model Model Triton plus) 47012 6250
Dust cover
Chinrest tissue
To Next Page
Loading...
Need help?
General
