Topcon HiPer Ga - Installing Modem-TPS

Installing Topcon Software
P/N 7010-0816
2-3
To install PC-CDU:
1. Create a PC-CDU folder on the hard drive and place the
compressed PC-CDU zip file (retrieved from either the website or
the GPS+ CD) in this folder.
2. Navigate to the PC-CDU folder, and double-click the PC-
CDU_MS zip file.
3. Extract the PCCDU.EXE and associated *.dll file to the PC-CDU
folder (Figure 2-1).
4. Optionally, create a shortcut on the computer’s desktop for quick
access to PC-CDU (Figure 2-1).
Figure 2-1. Extract Program and Create Shortcut
To uninstall PC-CDU, navigate to the location of the *.exe file. Select
the file, and press Delete.
Installing Modem-TPS
Modem-TPS is a configuration program for the radio modem board
inside the receiver. Modem-TPS is available from the TPS website
(www.topconpositioning.com) or on the GPS+ CD.
Computer requirements for Modem-TPS are: Windows® 98 or newer
and an RS-232C port or Bluetooth® wireless technology. Use
Modem-TPS version 2.2p2 or newer to correctly configure the
receiver.