Topcon HiPer Ga - Loading Receiver and Power Board Firmware

Receiver and File Maintenance
HiPer Ga/Gb Operator’s Manual
5-18
5. See “Loading Receiver and Power Board Firmware” on
page 5-18 to load the appropriate firmware.
Figure 5-18. FLoader Main Screen
Loading Receiver and Power Board
Firmware
Receiver and power board firmware is released as a compressed file to
download and decompress. This file contains the following three files:
• ramimage.ldr – the Receiver board RAM file
• main.ldp – the Receiver board Flash file
• powbrd.ldr – the Power board RAM file
NOTICE
Load all three files when loading new firmware.
These files must come from the same firmware
package.