Topcon HiPer Ga User Manual

Pre-survey Preparation
HiPer Ga/Gb Operator’s Manual
2-18
Connecting to BTCONF and Setting
Security Parameters
Once BTCONF is available (see “Installing BTCONF” on page 2-5),
follow these steps to configure the Bluetooth module:
1. Using the RS232 cable, connect the serial port of the computer
(usually COM1) to the receiver’s serial port. If needed, turn on
the receiver and computer.
2. Run the Bluetooth module configuration program (Figure 2-13).
3. For BTCONF version and copyright information, click About.
Figure 2-13. Bluetooth Module Configuration Main Screen
4. From the drop-down list in the upper left corner, select the
computer serial port (usually COM1) used for communication
(Figure 2-14).

Topcon HiPer Ga Specifications

General

Brand	Topcon
Model	HiPer Ga
Category	Receiver
Language	English