Toro Reelmaster 5510-D - Releasing Pressure from the Hydraulic System

ReleasingPressurefromtheHydraulicSystem
Releaseallthepressureinthehydraulicsystembeforeyouworkonthehydraulic
system.
Systempressureinthemowcircuitisreleasedwhenthecuttingunitsare
disengaged.
ReleasingtheHydraulicPressurefromtheTractionCircuit
Note:Ifyouparkthemachineonaninclineorslope,thepressureinthetraction
circuitdoesnotrelease.
1.Parkthemachineonalevelsurface.
2.Lowerthecuttingunits.
3.TurnthekeyswitchtotheOFFpositionandallowtheenginetostop.
4.Movethetractionpedalinboththeforwardandreversedirection.
ReleasingtheHydraulicPressurefromtheLiftCircuit
1.TurnthekeyswitchtotheON(donotstarttheengine)andfullylowerthe
cuttingunitstotheground.
2.TurnthekeyswitchtotheOFFpositionandallowtheenginetostop.
3.Afterloweringthecuttingunits,ensurethattheliftcylinderdoesnotsupport
thecuttingunits.
ReleasingtheHydraulicPressurefromtheSteeringCircuit
1.Parkthemachineonalevelsurface.
2.Lowerthecuttingunits.
3.TurnthekeyswitchtotheOFFpositionandallowtheenginetostop.
4.Aftertheenginehascometoacompletestop,rotatethesteeringwheelin
bothdirections.
HydraulicSystem:GeneralInformation
Page6–8
Reelmaster
®
5410/5510/5610Series
15216SLRevC