Toro Reelmaster 5510-D - Bedbar Assembly

BedbarAssembly
g214400
Figure331
1.Bedbarassembly
5.Plasticwasher(4each)9.Bedbarpivotbolt(2each)
2.Locknut(2each)6.Rubberbushing(2each)10.Locknut(2each)
3.Compressionspring(2each)7.Flangebushing(2each)
4.Washer(2each)8.Metalwasher(2each)
RemovingtheBedbarAssembly
1.Parkthemachineonacleanandlevelsurface,lowerthecuttingunits,shut
offtheengine,settheparkingbrake,andremovethekeyfromthekeyswitch.
2.Removethecuttingunitfromthemachine.Usethecuttingunitkickstandto
supportthecuttingunit;referto(page).
3.Loosenthelocknut(item2in)ontheendofeachbedbaradjusterassembly
untilthewasherisloose.
4.Loosenthelocknut(item10)oneachbedbarpivotbolt.
5.Removethe2bedbarpivotbolts(item9),2metalwashers,and4plastic
washersfromthecuttingunitsideplates.
CAUTION
Contactwiththereel,bedknife,orothercuttingunitpartscanresult
inpersonalinjury.
Useheavygloveswhenhandlingthebedbar.
CuttingUnit:ServiceandRepairs
Page9–20
Reelmaster
®
5410/5510/5610Series
15216SLRevC