Toro Reelmaster 5510-D - Height Adjuster Assembly

HeightAdjusterAssembly
g220500
Figure401
1.Button-headscrew
8.Washer(2each)15.Compressionspring
2.Detentspring
9.Locknut
16.Compressionspring
3.Heightadjusterknob10.Flangenut
17.Height-of-cutbracket
4.Quickupcover11.Cotterpin
18.Flatwasher
5.Quickuplever12.Clevispin19.Groomerbumper(left)
6.Heightadjustmentbolt
13.Washer(2each)
20.Locknut
7.Flange-headbolt14.Heightadjustmentrod
21.Pinchbolt(frontroller)
DisassemblingtheHeightAdjusterAssembly
1.Parkthemachineonacleanandlevelsurface,lowerthecuttingunits
completelytotheground,shutofftheengine,settheparkingbrake,and
removethekeyfromthekeyswitch.
2.Removethecotterpinsandclevispinsthatsecuretheheightadjustment
rodstothegroomergearboxandidlerarm.Discardthecotterpins.
3.Loosenthe2heightadjustmentboltlocknuts.
4.Loosenthe2frontrollerpinchboltlocknutsandbolts.
5.Removetheangenut(item10inFigure401)andange-headboltthat
securetheheightadjusterassemblytothecuttingunitsideplate,andremove
thefrontrollerandheightadjusterfromthecuttingunit.
Reelmaster
®
5410/5510/5610Series
Page11–17
UniversalGroomer(Optional):ServiceandRepairs
15216SLRevC