Toro Reelmaster 5510-D - Page 291

AssemblingtheGearPump
1.Applycleanhydraulicuidtoallthepartsbeforeyouassemblethem.
Note:Thepressuresealsandback-upringstinthegroovesmachined
intothethrustplates.Thebodysealstinthegroovesmachinedinthe
bodyfaces.
2.Assemblethepumpsectionsstartingatthefrontcoverend.Applygrease
orpetroleumjellytonewsectionsealstoholdtheminpositionduringthe
gearpumpassembly.
3.Afterthepumphasbeenassembled,tightentheboltsandnutsbyhand.
Rotatethedriveshafttocheckforbinding.Protecttheshaftifyouusepliers.
4.Torquetheboltsandnutsevenlyto45N∙m(33ft-lb)inacrossingpattern.
Reelmaster
®
5410/5510/5610Series
Page6–173
HydraulicSystem:ServiceandRepairs
15216SLRevC