Toro Reelmaster 5510-D - Page 328

AssemblingtheCuttingReelMotor(continued)
IMPORTANT
Whenyouclampthemotorinavise,clampthefrontangeonlyto
preventdamage.Also,useaviseequippedwithsoftjaws.
17.Clampthefrontangeofthemotorinaviseequippedwithsoftjaws.
18.Alternatelytorquetheboltsto45N∙m(33ft-lb).
19.OnReelmaster5510and5610seriesreelmotor,installthecross-overrelief
valvesintotherearangeiftheywereremoved;torquethereliefvalves
to25N∙m(18ft-lb).
20.Removethemotorfromthevise.
21.Putasmallquantityofcleanhydraulicuidintheinletofthemotorandrotate
thedriveshaftawayfromtheinletfor1revolution.Ifthereisanybinding,
disassemblethemotorandcheckforassemblyproblems.
HydraulicSystem:ServiceandRepairs
Page6–210
Reelmaster
®
5410/5510/5610Series
15216SLRevC