Toro Reelmaster 5510-D - Page 453

TestingtheHydraulicSolenoidValveCoils(continued)
SolenoidValveCoilSpecicationsTable
SolenoidValveCoil
DiameterHeightResistance
MSV1andMSV2
(mow)
46.7mm(1.84inches)49.9mm(1.96inches)
7.1ohms
SV2andSVRV(lift)46.7mm(1.84inches)49.9mm(1.96inches)
7.1ohms
SV1andSV3(lift)35.8mm(1.41inches)36.3mm(1.43inches)
8.8ohms
6.Ifthesolenoidcoilresistanceisincorrect,replacethesolenoidcoil;referto
HydraulicSolenoidValveCoils(page7–120).
7.Ifthesolenoidcoiltestingiscorrectandacircuitproblemstillexists,check
themainwireharness;refertotheElectricalSchematicandWireHarness
Drawings/DiagramsinAppendixA(pageA–1).
8.Aftertestingthecoils,connectthewireharnesselectricalconnectortothe
solenoidvalvecoil.
9.Lowerandsecuretheoperatorseatifthemowcontrolmanifoldwas
accessed.Installtheoperatoroorplateiftheliftcontrolmanifoldwas
accessed.
Reelmaster
®
5410/5510/5610Series
Page7–97
ElectricalSystem:TestingtheElectricalComponents
15216SLRevC