Toro Reelmaster 5510-D - Page 591

DisassemblingtheDriveSystem(continued)
g230301
Figure369
1.Drivehousing
4.Socket-headscrew
2.Driveshaft5.Grommet
3.O-ring
A.Removesocketheadscrewsthatsecuredrivehousingtocuttingunit
sideplateandremovehousingfromcuttingunit.
g228652
Figure370
1.Driveshaftwithright-handthreads(no
groove)
2.Driveshaftwithleft-handthreads(with
groove)
IMPORTANT
Ifrearrollerbrushdriveisonleftsideofcuttingunit,driveshaft
haslefthandthreadsandcanbeidentiedbyagrooveonthe
ange.Iftherearrollerbrushdriveisonrightsideofcuttingunit,
driveshafthasrighthandthreadsanddoesnothaveagroove
ontheange.
B.Loosenandremovedriveshaftfromcuttingreel.
AssemblingtheDriveSystem
1.Installdriveshaftifitwasremoved:
A.ApplyLoctite#243(orequivalent)tothreadsofdriveshaft.Threaddrive
shaftintocuttingreelandtorquefrom115to128N∙m(85to95ft-lb).
B.MakesurethatO-ringisplacedoninnerangeofdrivehousing.
Reelmaster
®
5410/5510/5610Series
Page9–61
CuttingUnit:ServiceandRepairs
15216SLRevC