Toro titan zx - Specifications; 2009-2010 TITAN ZX Models

SPECIFICATIONS
2-1
Toro TITAN 2009-2013 Service Manual
2
2009 - 2010 TITAN ZX Specications
Congurations TITAN ZX5000 TITAN ZX4800 TITAN ZX5450
22 HP Kawasaki V-Twin 50” SD, 3 Blades
23 HP Kohler Courage
‘Pro’ V-Twin
48” SD, 3 Blades
25 HP Kohler Courage
‘Pro’ V-Twin
54” SD, 3 Blades
Power Systems TITAN ZX5000 TITAN ZX4800 TITAN ZX5450
Clutch Electric Electric Electric
Transaxles Twin Hydro-Gear ZT2800
Hydrostatic Transaxle w/
charge pumps
Twin Hydro-Gear ZT2800
Hydrostatic Transaxle w/
charge pumps
Twin Hydro-Gear ZT2800
Hydrostatic Transaxle w/
charge pumps
Drive Belt Drive with self-
tensioning system
Belt Drive with self-
tensioning system
Belt Drive with self-
tensioning system
Maximum Ground Speed
(Fwd/Rev)
7.5 mph/3.8 mph 7.5 mph/3.8 mph 7.5 mph/3.8 mph
Rear Drive Tires 20” x 8.5”-8 4 ply rated 20” x 8.5”-8 4 ply rated 20” x 8.5”-8 4 ply rated
Front Caster Tires 410/350 x 5”
Smooth Tread 4 ply rated
410/350 x 5”
Smooth Tread 4 ply rated
410/350 x 5”
Smooth Tread 4 ply rated
Fuel / Capacity 5 gallons (18.9 L) 5 gallons (18.9 L) 5 gallons (18.9 L)
Mowing Deck: TITAN ZX5000 TITAN ZX4800 TITAN ZX5450
Type Side Discharge Side Discharge Side Discharge
Deck Construction/
Material
12 gauge stamped steel 10 gauge fabricated steel 10 gauge fabricated steel
Spindle Housings Die cast aluminum Die cast aluminum Die cast aluminum
Spindle Shaft/Bearings Three 17mm permanently
lubed ball bearings
Three 25mm permanently
lubed ball bearings
Three 25mm permanently
lubed ball bearings
Blades Three 17.5” x 2.25” x
.164” heat treated steel
Three 16.5” x 2.25” x
.164” heat treated steel
Three 18.75” x 2.25” x
.164” heat treated steel
Blade Tip Speed 18,889 ft/min @ 3650
RPM
18,670 ft/min @ 3700
RPM
18,644 ft/min @ 3700
RPM
Cutting Height 1.5” to 4.5” (13 Positions) 1.5” to 4.5” (13 Positions) 1.5” to 4.5” (13 Positions)
Anti-Scalp Rollers 3 adjustable 3 adjustable 3 adjustable
Frame Construction 1.5” x 3” (.109 wall)
Mechanical Steel Tubing
1.5” x 3” (.109 wall)
Mechanical Steel Tubing
1.5” x 3” (.109 wall)
Mechanical Steel Tubing