Toro titan zx - Motion Control Box; Seat Pivot Installation

CHASSIS
3-12
Toro TITAN 2009-2013 Service Manual
3
13. Remove the (2) bolts/nuts (J) that secure the front
motion control box to the frame (Fig. 024).
Fig. 024 PICT-2088
14. Remove the (2) fasteners that secure the oor pan
to the frame. Remove the oor pan.
15. The Motion Control Box is now loose and can be
removed from the frame.
Motion Control Box / Seat Pivot Installation
1. Install the control box / motion control assembly onto
the frame.
2. Install the (6) fasteners securing the control box
assembly to the frame and torque to specica tion:
• (H) (4) Bolts- 6 ft-lbs. (8 Nm)
• (I) (2) Carriage Bolt Fasteners - 17 ft-lbs. (23 Nm)
(Fig. 025)
Fig. 025 PICT-2084
H
I
3. Install the (2) bolts/nuts (J) that secure the front
motion control bolt to the frame and torque to
specication - 17 ft-lbs. (23 Nm) (Fig. 026).
Fig. 026 PICT-2088
J J
J J