Left and Right Neutral Switch Removal (continued)
g421553
Figure 144
Left and Right Neutral Switch Installation
1. Install the neutral safety switches. Connect the wire harness to the LH &
RH neutral safety switches.
g421553
Figure 145
2. Install the LH and RH pods. Refer to Left Hand Pod Installation ( page 6– 21 )
and Right Hand Pod Installation ( page 6– 23 ) .
3. Connect the battery by installing the positive cable rst, then the negative
cable to the battery .
Electrical: Service and Repairs Page 8–20 2000 Series Z MASTER®Service Manual
3460-328 Rev A
To Next Page
Loading...
