viii model 3000 ADMAP-5M AN712 Module User’s Manual
Be Sure To Observe The Following
Observe the following to ensure the safety of the operator in using the equipment and to
keep it in normal operating condition.
1. Carefully read the Operation Manual before use.
2. Avoid installing or keeping the equipment at any of the places or in the environment
mentioned below.
(1) Very dusty place
(2) Place where corrosive gases (SO
2
, H
2
S, etc.) are generated
(3) Place where the product may be exposed to vibration or shock
(4) Environment of low or high temperature deviating from the conditions for instal-
lation specified herein.
(5) Very humid place
3. If the ambient temperature or the internal temperature of the equipment has arisen
too high, or if the equipment has developed a fault, stop using it, switch power off,
and contact the nearest Toshiba service station.
4. Do not open the case of the equipment while it is in operation except when setting
the switches.
5. Do not attempt to modify the equipment.
6. Be careful not to drop the product during transit.
To Next Page
Loading...
Need help?
General
