48 model 3000 ADMAP-5M AN712 Module User’s Manual
Chapter 5 Application Interface
5
5.7.6 PCS parameter write (in word units)
<Function>
To write parameters (XPW, XTS, etc.) of the controller PCS in word units
<Message format>
<Note>
• PCS parameter (XPW) data numbers are inconstant. The number of PCS timers is
512; that of PCS counters, 128; that of error monitor timers, 32; that of congestion
monitor timers, 32.
• The first half (256) of the PCS timer is in seconds and the last half (256) of it, in
minutes.
Command
Response
15 8 7 0
1
Classification code (0x1110)
Type 0
Offset address (word)
Write data number n (quantity)
+00(0x00)
+16(0x10)
+20
0x14
+22
0x16
+26
0x1A
+28
0x1C
+30
0x1E
+32
0x20
+34
0x22
+36
0x24
Invocati on ID (32 -bit value)
15 0
+00(0x00)
+16
0x10
+20
0x14
Invocati on ID (s ame as for command)
0
Type 1
Type 2 Type 3
0
T
e: S
ecif
the followin
aramete
es in the order 0, 1, 2, and 3 usin
AS CII character strings.
'XPW '(PCS parameter integer),
'XTS '(PCS timer set value),
'XCS '(PCS counter set),
'XCM '(PCS counter operating status),
'FMT '(Error monitor timer),
'STL '(Congestion monitor timer)
'AN712 MMS WC '
Status (0)
+24
0x18
Status (0)
'AN712 MMS WR '
Byte address
Write dat a 1 (word)
Write dat a 2 (word)
Write dat a n (word)
+38
0x26
+40
0x28
Aux. information (
transmit source address
)
+14(0x0E)
Aux. information (
transmit source address
)
+14(0x0E)