6F8C1048 91
7.4Installing Ferrite Core / Frame Ground Cable
7
7.4 Installing Ferrite Core / Frame Ground Cable
In using an AN712 module, install the ferrite core supplied as an accessory to the input
cable for the model 3000 power module.
Connect the Frame Ground Terminal of the power module and the base unit in IV cable*.
Figure 7-4 Example of Installing Ferrite Core Clamp / Frame Groung Cable
PS791S
Power module
Power cable
Power terminal
unit
Ferrite core clamp
(Install it as close to the power
terminal unit as possible.)
*IV Cable
Size : 1.25mm
2
or more(recommendation)
Color : Green, Green/Yellow
Length : 16cm
Frame Ground
Terminal
To Next Page
Loading...
