Toshiba 3000 - AN712 Module Registration

6F8C1048 9
3.2Tool Setting and Operation
3
3.2.1 AN712 module registration
The procedures for registering AN712 modules and a network in cases where AN712
modules are installed in an S3 controller are described below.
(1) Station registration
Register stations, which include AN712 modules, on the Product View screen. Select
[Station] under a created system (Integrated Controller ADMAP system in the example),
and choose [New Create (W
)]. [ADMAP-Stn (model 3000)] is created in the example.
Add units to the station as follows: Select [Unit] under the created station [ADMAP-Stn
(model 3000)], and choose [New Create (W
)]. [ADMAP-Stn (model 3000)] is created in
the example.